Banner Motorsports Industrial Flyer Luna Sol Swag
  • Screen Kits

    $100.00$175.00
    Nothing can ruin a great camping trip faster than a mosquito. We’ve all experienced these often silent but annoying pests. Don’t let them ruin your next camping trip, outfit your Flyer with a rear and side door screen kit. Simple to install, simple to use, the inTech screen doors are held in place with rare earth magnets (these things are crazy strong). Each kit comes with a side screen door, rear screen door and the required mounting hardware. (Explore Double Tip-Out will provide one screen for the rear double doors and mounting hardware.) Available to fit Chase, Pursue and Explore. *Additional Information in box below refers to shipping criteria
  • LED oval panel clearance Light. The light runs on 12V and is sealed for a waterproof design. The light includes a chrome bezel.
  • Windshield Cover

    $125.00$156.25
    Exterior windshield cover made from black, heavy canvas. The cover comes in two different sizes, one size fits all Luna models, the other size fits the Sol model.   The cover will help prevent against any possible damage when traveling. The cover is installed onto the front cap with screw end button snaps (included). An install guide is included when the cover is shipped. *Additional Information in box below refers to shipping criteria
  • Gray bungee cord with fastener ends, installed on open cabinet storage areas. 5 sizes available. Please measure the storage area width and note quantity needed to ensure correct ordering. Quantity of one (1) bungee cord. *Please note - for easy install, a right angled drilled is HIGHLY recommended.* *Additional Information in box below refers to shipping criteria
  • DOT Tape, 2" wide, alternating red and white every 6 inches. Sold by the running foot.
  • Oval Stop, Turn Tail Light LED with clear lens. Light runs on 12V and is sealed for a waterproof design. The light includes a bezel.
  • LED oval clearance light. The light runs on 12V. The light is sealed and waterproof. The light includes a snap on chrome bezel.
  • Diamond Framed Net

    $16.25$18.75
    Creates functional storage space by using netting and a steel framing. Mounts flush to any open wall space. Includes mounting hardware for installation. *Additional Information in box below refers to shipping criteria
  • The tent comfortably sleeps four people with extra storage space. The tent is complete with two entrances and three mesh windows. It attaches to the rear of the unit to accommodate extra sleeping space or allow for more leisure space. Size of the complete tent; 8.5’ x 8.5’ x 6.5’. Works with Flyer Chase and Pursue models. *Additional Information in box below refers to shipping criteria
  • Axle Lift Kit

    $125.00$150.00
    The lift kit includes installation instructions, spaces and mounting hardware. The lift kit is meant to be used for a single axle only. This kit will provide a 2.625” lift on the axle. *Additional Information in box below refers to shipping criteria
  • Exclusive for the Sol Dawn, this extra extension will dramatically increase the sleeping area. Dimensions 35" x 15". Finished bed measures 63"x80". *Additional Information in box below refers to shipping criteria
  • Cabinet Door Latch Cabinet Latch. Locking 1.75" Arm. Includes .375" mounting bracket. Available in Chrome or Black (shown). *Additional Information in box below refers to shipping criteria
  • Dual 20# LP Tank Kit includes regulator, tank pan, LP hoses and rods. This kit will convert a one LP tank set up into a two LP tank set up. This kit will only work on Sol units. *Additional Information in box below refers to shipping criteria
  • Mini LED Clearance Light. The light is sealed and waterproof. The light runs on 12V. It is surface mount. Includes a bezel.
  • Powered Roof Vent and Fan with white lid and base. The vent runs on 12V. Includes a screen, and weather stripping.
  • Custom made at inTech for each trailer. We pre-bend these at full size and ship with mounting hardware. After installation, you will need to cut the ends of the fender off as they will be shipped at full length (longer than needed). Available in Mill Finish or Clear Anodized and Black Anodized.
  • The black gussets are used to help add extra stabilization to the square tube roof rack on the Flyers. This kit includes four corner gussets and screws for installation.  *Please note - ordering QTY 1 = four gussets + screws* *Additional Information in box below refers to shipping criteria
  • Roof rack clamp brackets. *Additional Information in box below refers to shipping criteria
  • Black Rubber Hinge Cover often used on ramp doors. Used to replace worn out covers, OEM material used to keep the hinge clean and sealed.
  • PahaQue brand Luna cover, designed to fit all Luna models, even the models with a roof rack installed. All covers are made using heavy-duty 600D waterproof, breathable woven fabric with a 3 year warranty against defects in materials and workmanship. Zippered door allows access to your trailer without having to remove the cover each time. Installs in minutes and stays secure with adjustable straps that attach underneath trailer. Includes Cover, Straps, and Carry Bag. Ships in approximately 4 to 5 weeks.
  • Stainless steel wheel center cap. Used on all inTech RV wheels - Flyer, Luna and Sol models. *Additional Information in box below refers to shipping criteria
  • Angled LED Porch Light

    $18.75$25.00
    LED light with black housing. The light is sealed and waterproof. Runs on 12V and comes with hard wires, lead and ground wires. Measures 11" long.  *Additional Information in box below refers to shipping criteria 
  • Zip universal replacement breakaway cable 4'. Quick & easy hook up for the breakaway cable - no more dragging on the ground. *Additional Information in box below refers to shipping criteria
  • Stainless steel roll up sink cover. Cover best fits the sink used in the Sol units. When cover is not being used, it is easy to store in drawer located in the Sol kitchen. Cover measures 25.5" x 14.75" *Additional Information in box below refers to shipping criteria  
  • Aluminum black anodized mounting button, used for the exterior Flyer removable kitchen table.   Price includes two mounting buttons and hardware. *Additional Information in box below refers to shipping criteria
  • D-Ring Tiedown

    $12.50$17.50
    D-Ring Tiedown
  • Lug Nut

    $2.60
    Stainless steel lug nut. Used on all inTech RV tires - Flyer, Luna and Sol models. .5" *Additional Information in box below refers to shipping criteria
  • LED License plate light. Light runs on 12V, polished chrome finish. Includes mounting gasket.
  • Compartment/ gen Door Latch commonly used on motorsports trailers and fiber optic trailers. Door lock can be used on generator doors and locking baggage doors. Door lock comes with lock, striker plate and key. Please note - Keys are AE***; key provided will work your new lock but we cannot guarantee this lock key assembly will match any other similar locks on your trailer.
  • Replacement ramp door bumper - for direct replacement of original ramp door bumper should your original bumpers get damaged or scraped. Sold by the each; with fastener hardware. *Additional Information in box below refers to shipping criteria
  • 16" Pull Cable w/Mount Brackets, No Striker Plate (Slide Out Step). Used on inTech Motorsports Trailers and on Industrial Trailers.
  • Replacement aluminum loop that is installed on the bottom of the tongue on a motorsports trailer. This is used to hold the end of the chain to keep them from hanging on the ground. Comes with mounting screws.
  • Interior LED light; 18.25" x 4.731", regularly used as ceiling light
  • This is a complete kit to replace the front LP cover assembly. This kit includes one Front LP Cover, one Front Moon "Luna" Decal and two Swell Action Latches. The kit will be shipped with installation instructions. *Additional Information in box below refers to shipping criteria
  • Black scissor jack handle. Allows you to manually crank the jack to raise or lower them. *Additional Information in box below refers to shipping criteria
  • This kit will convert the Luna front LP swell latches to a hairpin hood latch style. This new latch style will add more security to the cover while towing the Luna. The kit includes 2 aluminum plates, 2 washers, and a hairpin hood latch kit. *Additional Information in box below refers to shipping criteria