Banner Motorsports Industrial Flyer Luna Sol Swag
  • Screen Kits

    $160.00$175.00
    Nothing can ruin a great camping trip faster than a mosquito. We’ve all experienced these often silent but annoying pests. Don’t let them ruin your next camping trip, outfit your Flyer with a rear and side door screen kit. Simple to install, simple to use, the inTech screen doors are held in place with rare earth magnets (these things are crazy strong). Each kit comes with a side screen door, rear screen door and the required mounting hardware. Available to fit Chase, Pursue and Explore.
  • LED oval panel clearance Light. The light runs on 12V and is sealed for a waterproof design. The light includes a chrome bezel.
  • Windshield Cover

    $125.00$156.25
    Exterior windshield cover made from black, heavy canvas. The cover comes in two different sizes, one size fits all Luna models, the other size fits the Sol model.   The cover will help prevent against any possible damage when traveling. The cover is installed onto the front cap with screw end button snaps (included). An install guide is included when the cover is shipped. *Additional Information in box below refers to shipping criteria
  • Oval Stop, Turn Tail Light LED with clear lens. Light runs on 12V and is sealed for a waterproof design. The light includes a bezel.
  • LED oval clearance light. The light runs on 12V. The light is sealed and waterproof. The light includes a snap on chrome bezel.
  • Diamond Framed Net

    $16.25$18.75
    Creates functional storage space by using netting and a steel framing. Mounts flush to any open wall space. Includes mounting hardware for installation. *Additional Information in box below refers to shipping criteria
  • Axle Lift Kit

    $125.00$150.00
    The lift kit includes; installation instructions, spaces and mounting hardware. The lift kit is meant to be used for a single axle only. This kit will provide a 2-5/8” lift on the axle.
  • Size of the complete tent; 8.5’ x 8.5’ x 6.5’. The tent comfortably sleeps four people with extra storage space. The tent is complete with two entrances and three mesh windows. It attaches to the rear of the unit, to accommodate extra sleeping space or allow for more leisure space.
  • DOT Tape, 2" wide, alternating red and white every 6 inches. Sold by the running foot.
  • Black Rubber Hinge Cover often used on ramp doors. Used to replace worn out covers, OEM material used to keep the hinge clean and sealed.
  • Custom made at inTech for each trailer. We pre-bend these at full size and ship with mounting hardware. After installation, you will need to cut the ends of the fender off as they will be shipped at full length (longer than needed). Available in Mill Finish or Clear Anodized and Black Anodized.
  • The black gussets are used to help add extra stabilization to the roof rack on the Flyers. This kit includes four corner gussets and screws for installation.  *Please note - ordering QTY 1 = four gussets + screws*
  • Powered Roof Vent and Fan with white lid and base. The vent runs on 12V. Includes a screen, and weather stripping.
  • Cabinet Door Latch Cabinet Latch. Locking 1.75" Arm. Includes .375" mounting bracket. Available in Chrome or Black (shown). *Additional Information in box below refers to shipping criteria
  • Interior LED light; 18.25" x 4.731", regularly used as ceiling light
  • Gray bungee cord with fastener ends, installed on open cabinet storage areas. 5 sizes available. Please measure the storage area width and note quantity needed to ensure correct ordering. Quantity of one (1) bungee cord. *Please note - for easy install, a right angled drilled is HIGHLY recommended.* *Additional Information in box below refers to shipping criteria
  • RED Brake, Turn & Running Light with no bezel. Low profile and slimline design. Like runs on 12V and is surface mounted. The light is sealed and waterproof.
  • Stainless steel wheel center cap. Used on all inTech RV wheels - Flyer, Luna and Sol models. *Additional Information in box below refers to shipping criteria
  • Aluminum black anodized mounting button, used for the exterior Flyer removable kitchen table.   Price includes two mounting buttons and hardware.
  • D-Ring Tiedown

    $12.50$17.50
    D-Ring Tiedown
  • Double Stud Fitting with O ring. Designed for tie down on vehicles or other heavy/bulky items. Works with L Tracks.
  • RED Brake, Turn & Running Light with a bezel. Low profile and slimline design. Like runs on 12V and is surface mounted. The light is sealed and waterproof.
  • Amber Side Marker Light LED with bezel, turn signal light on side of the unit. Light runs on 12V. Sealed and waterproof. Surface mount.
  • LED License plate light. Light runs on 12V, polished chrome finish. Includes mounting gasket.
  • Grey netting measures 6" x 19". Creates functional storage space by using netting and steel framing. Mounts flush to any open wall space. Includes mounting hardware for installation. Please note - this item is currently discontinued and is no longer being used on production units.  Stock quantity is limited.
  • Red LED clearance light strip. The light is dust and water proof. It's mounted with two screws at the top and bottom, and the screws are covered with two clear screw covers. The light runs on 12V. The light measures 15" x 1.25". *Additional Information in box below refers to shipping criteria
  • Black exterior antenna. Heavy duty design, meant to withstand mobile environments. 13” rubber mast, with attached 72” cable.
  • Cable Clamp available in left or right hand style. Aluminum and includes hardware.
  • Mini LED Clearance Light. The light is sealed and waterproof. The light runs on 12V. It is surface mount. Includes a bezel.
  • This is a complete kit to replace the front LP cover assembly. This kit includes one Front LP Cover, one Front Moon "Luna" Decal and two Swell Action Latches. The kit will be shipped with installation instructions
  • LED Light for a license plate bracket. Black finish. The light is dust and waterproof. Easy to install, using only two screws. Runs on 12V. Goes with the License Plate Bracket. Measures 2.25" x 2.2" x .72" *Additional Information in box below refers to shipping criteria
  • Door holdback ball and socket style. Aluminum finish. Available in Black and Mill Finish (shown). *Additional Information in box below refers to shipping criteria
  • Dual 20# LP Tank Kit includes regulator, tank pan, LP hoses and rods. This kit will convert a one LP tank set up into a two LP tank set up. This kit will only work on Sol units. *Additional Information in box below refers to shipping criteria
  • Compartment/ gen Door Latch commonly used on motorsports trailers and fiber optic trailers. Door lock can be used on generator doors and locking baggage doors. Door lock comes with lock, striker plate and key. Please note - Keys are AE***; key provided will work your new lock but we cannot guarantee this lock key assembly will match any other similar locks on your trailer.
  • 16" Pull Cable w/Mount Brackets, No Striker Plate (Slide Out Step). Used on inTech Motorsports Trailers and on Industrial Trailers.
  • Stainless steel roll up sink cover. Cover best fits the sink used in the Sol units. When cover is not being used, it is easy to store in drawer located in the Sol kitchen. Cover measures 25.5" x 14.75" *Additional Information in box below refers to shipping criteria