Banner Motorsports Industrial Flyer Luna Sol Swag
  • Black scissor jack handle. Allows you to manually crank the jack to raise or lower them.
  • LED light with chrome housing. This light has no button on the housing. The light is sealed and waterproof. Runs on 12V and comes with hard wires, lead and ground wires. Can be used either interior or exterior. The light measures 18" long. *Additional Information in box below refers to shipping criteria
  • Stainless steel wheel center cap. Used on all inTech RV wheels - Flyer, Luna and Sol models. *Additional Information in box below refers to shipping criteria
  • Lug Nut

    $2.60
    Stainless steel lug nut. Used on all inTech RV tires - Flyer, Luna and Sol models. .5" *Additional Information in box below refers to shipping criteria
  • Threaded Alum Knob 3/8"-16 x 3" Four-Arm Alum Head, with Riv-nut. Often used to hold down removable fenders
  • Replacement removable foot pad for tongue jack. *Additional Information in box below refers to shipping criteria
  • 16" Pull Cable w/Mount Brackets, No Striker Plate (Slide Out Step). Used on inTech Motorsports Trailers and on Industrial Trailers.
  • Replacement aluminum loop that is installed on the bottom of the tongue on a motorsports trailer. This is used to hold the end of the chain to keep them from hanging on the ground. Comes with mounting screws.
  • Stainless steel roll up sink cover. Cover best fits the sink used in the Sol units. When cover is not being used, it is easy to store in drawer located in the Sol kitchen. Cover measures 25.5" x 14.75" *Additional Information in box below refers to shipping criteria  
  • Interior fabric window curtains. Includes two side window panels and two entry door window panels. Side window panels measure 58" x 28" and the entry door window panels measure 28" x 24.5".
  • Black Tee

    $17.50$20.50
    Super soft and comfortable tee by Next Level Apparel. Features a metallic-looking logo.
  • Blue Tee

    $17.50$20.50
    Super soft and comfortable tee by Next Level Apparel. Features a grunge "license plate" inTech logo.
  • Black Frost Tee

    $17.50$20.50
    Super soft and comfortable tee by Next Level Apparel. Features a retro-looking inTech logo.
  • Purple Tee

    $17.50$20.50
    Super soft and comfortable tee by Next Level Apparel. Features a retro-looking inTech logo.
  • Black magnetic door holdback. 3.375" long and includes stop. *Additional Information in box below refers to shipping criteria
  • Aluminum black anodized mounting button, used for the exterior Flyer removable kitchen table.   Price includes two mounting buttons and hardware.
  • Rub Rail Screw Cover

    $24.00$30.25
    Black screw cover installed on the edge rub rail for the Flyer units.  Flexible screw cover that slides into the rub rail track.  Cover is cut to size to fit each unit. Qty one will provide enough material to replace entire part on the unit.
  • Windshield Cover

    $125.00$156.25
    Exterior windshield cover made from black, heavy canvas. The cover comes in two different sizes, one size fits all Luna models, the other size fits the Sol model.   The cover will help prevent against any possible damage when traveling. The cover is installed onto the front cap with screw end button snaps (included). An install guide is included when the cover is shipped. *Additional Information in box below refers to shipping criteria
  • Black exterior antenna. Heavy duty design, meant to withstand mobile environments. 13” rubber mast, with attached 72” cable.
  • Black roof rack, includes two cross members and four mounting feet. Cross members measure 72” long. This roof rack can be used on all Luna models. Use the roof rack for additional storage while traveling and/or add an awning to enjoy while camping. Install guide is included when shipped.
  • Screen Kits

    $160.00$175.00
    Nothing can ruin a great camping trip faster than a mosquito. We’ve all experienced these often silent but annoying pests. Don’t let them ruin your next camping trip, outfit your Flyer with a rear and side door screen kit. Simple to install, simple to use, the inTech screen doors are held in place with rare earth magnets (these things are crazy strong). Each kit comes with a side screen door, rear screen door and the required mounting hardware. Available to fit Chase, Pursue and Explore.
  • Light switch with slide dimmer for 12V lights. One switch for on/off and a slide switch for dimming.
  • Black Rubber Hinge Cover often used on ramp doors. Used to replace worn out covers, OEM material used to keep the hinge clean and sealed.
  • Wall mount USB charging recept. Recept comes with two USB ports and one 12V power outlet. The USB ports charges most powered devices. The 12V power outlet fits most standard 12V lighter style plugs. Fits standard wall plates. Recept runs on 12V.
  • Rear caster wheel, solid tire. Includes brackets and hardware for installation.
  • D-Ring Tiedown

    $12.50$17.50
    D-Ring Tiedown
  • Cable Clamp available in left or right hand style. Aluminum and includes hardware.
  • On/Off Battery Disconnect Switch. Panel mounted with knob handle. This disconnect controls the 12V power coming from the deep cycle battery.
  • LED light with chrome housing. The light measures 11" long. The light is sealed and waterproof. Runs on 12V and comes with hard wires, lead and ground wires.
  • Amber Side Marker Light LED with bezel, turn signal light on side of the unit. Light runs on 12V. Sealed and waterproof. Surface mount.
  • White LED Exterior Light, circle. Thin surface mount design and moisture resistant. Light runs on 12V. Bezel included.
  • Oval reverse light with stainless steel covers. The light is displayed as an angled for more coverage. Sold as a pair. The light runs on 12V and is side mounted.
  • Puts off an incredible amount of light as it is typically used in emergency vehicles. Has slight downward cast of light. Runs on 12V and is surfaced mounted. Includes mounting screws & on/off switch w/ dimmer.
  • Custom made at inTech for each trailer. We pre-bend these at full size and ship with mounting hardware. After installation, you will need to cut the ends of the fender off as they will be shipped at full length (longer than needed). Available in Mill Finish or Clear Anodized and Black Anodized.
  • Chrome finished decal. Chrome and black badge style decal. Measure 4" x 4". "Small" badge