Banner Motorsports Industrial Flyer Luna Sol Swag
  • This kit will convert the Luna front LP swell latches to a hairpin hood latch style. This new latch style will add more security to the cover while towing the Luna. The kit includes 2 aluminum plates, 2 washers, and a hairpin hood latch kit. *Additional Information in box below refers to shipping criteria
  • Black scissor jack handle. Allows you to manually crank the jack to raise or lower them. *Additional Information in box below refers to shipping criteria
  • Rear caster wheel, solid tire. Includes brackets and hardware for installation.
  • RED Brake, Turn & Running Light with no bezel. Low profile and slimline design. Like runs on 12V and is surface mounted. The light is sealed and waterproof.
  • C-Jack from Norco - BAL Industries. Manual stabilizer jack and foot pad, rated at 4000#
  • Threaded Alum Knob 3/8"-16 x 3" Four-Arm Alum Head, with Riv-nut. Often used to hold down removable fenders
  • Black exterior antenna. Heavy duty design, meant to withstand mobile environments. 13” rubber mast, with attached 72” cable.
  • Amber Side Marker Light LED with bezel, turn signal light on side of the unit. Light runs on 12V. Sealed and waterproof. Surface mount.
  • RED Brake, Turn & Running Light with a bezel. Low profile and slimline design. Like runs on 12V and is surface mounted. The light is sealed and waterproof.
  • D-Ring Tiedown

    $12.50$17.50
    D-Ring Tiedown
  • Chrome finished decal. Four icons included in decal strip. Actions include; bicycling, kayaking, hiking and fishing. Measures 6" x 1.5". *Additional Information in box below refers to shipping criteria
  • Door holdback ball and socket style. Aluminum finish. Available in Black and Mill Finish (shown). *Additional Information in box below refers to shipping criteria
  • Exterior door holdback with strike. Aluminum finish. Available in Black or Mill Finish (shown). *Additional Information in box below refers to shipping criteria
  • Black curtain rod with decorative pineapple shaped ends. The curtain rod is adjustable, 28" - 48" and .5" diameter. The curtain rod comes with mounting hardware and can be used on all inTech models. This style curtain rod was originally used on the Luna Lite models. *Additional Information in box below refers to shipping criteria
  • Stainless steel hook rail bar. Hook bar measures 10" and has four hooks. Hooks will easily hold kitchen accessories, coats, towels, bathroom accessories and various bedroom accessories. Hardware include. *Additional Information in box below refers to shipping criteria
  • 2-way LED reading light with Chrome base and accents. Blue and white light options. The light is adjustable, with a swivel joint. A black button at the base to turn on and off the light and to switch from blue and white light. The light runs on 12V. *Additional Information in box below refers to shipping criteria
  • Black decal. *Additional Information in box below refers to shipping criteria  
  • Rectangular reflector. Adhesive backing for surface mounting. Measures 3" x 1.5". Acrylic reflector. *Additional Information in box below refers to shipping criteria
  • Red LED clearance light strip. The light is dust and water proof. It's mounted with two screws at the top and bottom, and the screws are covered with two clear screw covers. The light runs on 12V. The light measures 15" x 1.25". *Additional Information in box below refers to shipping criteria
  • Black mini on-off battery disconnect switch with knob. Switch helps control the 12V power coming from the battery into the RV. Single circuit and measures 3" x 3". *Additional Information in box below refers to shipping criteria
  • Black roof rack, includes two cross members and four mounting feet. Cross members measure 72” long. This roof rack can be used on all Luna models. Use the roof rack for additional storage while traveling and/or add an awning to enjoy while camping. *Additional Information in box below refers to shipping criteria
  • Chrome finished decal. Chrome and black badge style decal. Measure 4" x 4". "Small" badge *Additional Information in box below refers to shipping criteria
  • Grey netting measures 6" x 19". Creates functional storage space by using netting and steel framing. Mounts flush to any open wall space. Includes mounting hardware for installation. Please note - this item is currently discontinued and is no longer being used on production units.  Stock quantity is limited. *Additional Information in box below refers to shipping criteria
  • LED Light for a license plate bracket. Black finish. The light is dust and waterproof. Easy to install, using only two screws. Runs on 12V. Goes with the License Plate Bracket. Measures 2.25" x 2.2" x .72" *Additional Information in box below refers to shipping criteria
  • License plate bracket is black powder coated. Includes washer and screws for installation. The bracket is made of heavy-duty steel. Measures 8.5" x 3". *Additional Information in box below refers to shipping criteria
  • Chase & Pursue roof rack crossbar addition. Crossbar addition includes roof rack crossbar - circle tube style and four bracket clamps for install. This crossbar will only work with Chase & Pursue units with the circle tube style roof rack. *Additional Information in box below refers to shipping criteria
  • Black magnetic door holdback. 3.375" long and includes stop. *Additional Information in box below refers to shipping criteria
  • Rub Rail Screw Cover

    $24.00$30.25
    Black screw cover installed on the edge rub rail for Flyer units.  Flexible screw cover that slides into the rub rail track.  Cover is cut to size to fit each unit. Qty one will provide enough material to replace entire part on the unit. *Additional Information in box below refers to shipping criteria
  • LED light with chrome housing. The light measures 11" long. The light is sealed and waterproof. Runs on 12V and comes with hard wires, lead and ground wires.
  • Heavy-duty design antenna, meant to withstand off-road and mobile environments. 6" rubber mast with attached 39" cable. *Additional Information in box below refers to shipping criteria
  • Curved bench cushions sized to fit the front bench seats in the Luna. Sold as a set, includes the left and right hand side. Cushions measure 22.5" x 19.5" *Additional Information in box below refers to shipping criteria
  • White LED Exterior Light, circle. Thin surface mount design and moisture resistant. Light runs on 12V. Bezel included.
  • Pair of oval reverse lights with stainless steel covers. The lights are displayed at an angle for more coverage. They run on 12V and are side mounted.
  • Flyer Name Logo Decal

    $18.75$27.50
    Chrome finished decal. *Additional Information in box below refers to shipping criteria
  • Single Stud Fitting with round ring. Designed for tie downs for lighter items. Work with L-tracks.
  • Clearance light measuring .75" included with the light is a black grommet surrounding the bulb. The light is non-directional. It is sealed and waterproof. The light runs on 12V. *Additional Information in box below refers to shipping criteria