Banner Motorsports Industrial Flyer Luna Sol Swag
  • Roof mounted strobe light, often included on inTech fiber - commercial trailers
  • Dual 20# LP Tank Kit includes regulator, tank pan, LP hoses and rods. This kit will convert a one LP tank set up into a two LP tank set up. This kit will only work on Sol units. *Additional Information in box below refers to shipping criteria
  • LED light with chrome housing. This light has no button on the housing. The light is sealed and waterproof. Runs on 12V and comes with hard wires, lead and ground wires. Can be used either interior or exterior. The light measures 18" long. *Additional Information in box below refers to shipping criteria
  • Rear caster wheel, solid tire. Includes brackets and hardware for installation.
  • Powered Roof Vent and Fan with white lid and base. The vent runs on 12V. Includes a screen, and weather stripping.
  • C-Jack from Norco - BAL Industries. Manual stabilizer jack and foot pad, rated at 4000#
  • LED clear back up light. 3 prong oval wire connector on back. Light runs on 12V and is sealed for a waterproof design. The light includes a chrome bezel.
  • Compartment/ gen Door Latch commonly used on motorsports trailers and fiber optic trailers. Door lock can be used on generator doors and locking baggage doors. Door lock comes with lock, striker plate and key. Please note - Keys are AE***; key provided will work your new lock but we cannot guarantee this lock key assembly will match any other similar locks on your trailer.
  • Interior fabric window curtains. Includes two side window panels and two entry door window panels. Side window panels measure 58" x 28" and the entry door window panels measure 28" x 24.5".
  • 16" Pull Cable w/Mount Brackets, No Striker Plate (Slide Out Step). Used on inTech Motorsports Trailers and on Industrial Trailers.
  • Stainless steel roll up sink cover. Cover best fits the sink used in the Sol units. When cover is not being used, it is easy to store in drawer located in the Sol kitchen. Cover measures 25.5" x 14.75" *Additional Information in box below refers to shipping criteria  
  • White toilet paper holder, completely closes and will keep the toilet paper roll dry at all times. Holder fits one toilet paper roll. *Additional Information in box below refers to shipping criteria
  • Oval Stop, Turn Tail Light LED with clear lens. Light runs on 12V and is sealed for a waterproof design. The light includes a bezel.
  • 12v ON-OFF switches, Black with Plate & Cover – 4 Gang
  • Light switch with slide dimmer for 12V lights. One switch for on/off and a slide switch for dimming.
  • Travel Trailer latch with lock and deadbolt. Uses Global Link keys. Key codes vary and we cannot guarantee that quantities over 1 will have the same key code. New installs will need striker plate.
  • Black stabilizer jack rated for 800 lbs. This jack is currently used on all Flyer and Luna models. This kit includes both the stabilizer jack and a round foot pad. The length of the jack is 21" and the retracted height is 19". *Additional Information in box below refers to shipping criteria
  • Day-Night Cellular Shade

    $35.00$52.50
    Color gray sheen & silver. ** NOTE: If you're ordering for a Luna, please select the 38" x 22" size ** All sizes can be applicable for a Sol unit; please check size of window for correct shade. ** *Additional Information in box below refers to shipping criteria
  • Charcoal hanging storage basket with Luna logo in the center. Measures 16" x 8.25" x 4". *Additional Information in box below refers to shipping criteria
  • 15" Slimline LED backup light. Low profile and slimline design. Runs on 12v. Attaches with 1 screw at each end. Bezel sold separately, part# 100. Can be used with or without bezel.
  • 12v ON-OFF switches, Black with Plate & Cover – 3 Gang
  • This kit will convert the Luna front LP swell latches to a hairpin hood latch style. This new latch style will add more security to the cover while towing the Luna. The kit includes 2 aluminum plates, 2 washers, and a hairpin hood latch kit. *Additional Information in box below refers to shipping criteria
  • Angled LED light. The light is sealed and waterproof. Runs on 12V and comes with hard wires, lead and ground wires. Available in Black or Chrome(Shown) and in 8" or 13.7"(Shown) lengths. *Additional Information in box below refers to shipping criteria
  • Black Scissor Jack rated for 2,500 lbs. This jack is currently used on all Sol models. This kit includes the scissor jack only. The length of the scissor jack is 24" and the retracted height is 18 3/4". *Additional Information in box below refers to shipping criteria
  • Striker Plates (Pair) with screws for inTech Motorsport Trailer with a ramp door that uses paddle latches. These Stiker Plates are for the door and receive the paddle to latch the door closed. Sold by the pair. *Additional Information in box below refers to shipping criteria
  • iT Logo Decal, 14.5" x 14.75" Orange and Black. Flat standard-style decal.
  • Stainless License Plate Bracket with 'inTech Trailers' laser-cut into bracket
  • LED License plate light. Light runs on 12V, polished chrome finish. Includes mounting gasket.
  • The black gussets are used to help add extra stabilization to the square tube roof rack on the Flyers. This kit includes four corner gussets and screws for installation.  *Please note - ordering QTY 1 = four gussets + screws* *Additional Information in box below refers to shipping criteria
  • Black mini on-off battery disconnect switch with knob. Switch helps control the 12V power coming from the battery into the RV. Single circuit and measures 3" x 3". *Additional Information in box below refers to shipping criteria
  • Rub Rail Screw Cover

    $24.00$30.25
    Black screw cover installed on the edge rub rail for Flyer units.  Flexible screw cover that slides into the rub rail track.  Cover is cut to size to fit each unit. Qty one will provide enough material to replace entire part on the unit. *Additional Information in box below refers to shipping criteria
  • On/Off Battery Disconnect Switch. Panel mounted with knob handle. This disconnect controls the 12V power coming from the deep cycle battery.
  • Amber Side Marker Light LED with bezel, turn signal light on side of the unit. Light runs on 12V. Sealed and waterproof. Surface mount.
  • Used for exterior upper and lower trim. Variations available are: Clear Anodized, Black Anodized, 6", 4", 4 foot, and 8 foot pieces.
  • Plastic soft touch white door grab handle. Handle is a curved design and is long enough for one or two hand grip. Handle has 11" of black rubber in the center for a non-slip grip. Handle measures 18" long with four screw opening at top and bottom. *Additional Information in box below refers to shipping criteria