Banner Motorsports Industrial Flyer Luna Sol Swag
  • Solid Grab Handle

    $8.00$10.00
    Aluminum grab handle. Measures 13". *Additional Information in box below refers to shipping criteria
  • Black Roof Vent ventilation system. 10 speed intake and exhaust fan, with a thermostat to help control the room temperature. Includes a remote for operation. *Additional Information in box below refers to shipping criteria
  • AMBER LED circle clearance light. The light runs on 12V and is sealed for a waterproof design. The light includes a chrome bezel.
  • Flyer Name Logo Decal

    $18.75$27.50
    Chrome finished decal. *Additional Information in box below refers to shipping criteria
  • Oval reverse light with stainless steel covers. The lights are displayed at an angle for more coverage. They run on 12V and are side mounted. Sold in singles, not pairs.
  • Silver hanging shower caddy organizer. Caddy measures 22" x 15" and is water resistant. *Additional Information in box below refers to shipping criteria
  • Black hairpin hoodpin kit used to secure the front LP cover on all Luna and Sol models. This kit includes two threaded studs, two front washers, screws, four nuts and two pins. *Additional Information in box below refers to shipping criteria
  • Black decal. *Additional Information in box below refers to shipping criteria  
  • Black mini on-off battery disconnect switch with knob. Switch helps control the 12V power coming from the battery into the RV. Single circuit and measures 3" x 3". *Additional Information in box below refers to shipping criteria
  • Heavy-duty design antenna, meant to withstand off-road and mobile environments. 6" rubber mast with attached 39" cable. *Additional Information in box below refers to shipping criteria
  • Curved bench cushions sized to fit the front bench seats in the Luna. Sold as a set, includes the left and right hand side. Cushions measure 22.5" x 19.5" *Additional Information in box below refers to shipping criteria
  • LED clear back up light. 3 prong oval wire connector on back. Light runs on 12V and is sealed for a waterproof design. The light includes a chrome bezel.
  • LED Light for a license plate bracket. Black finish. The light is dust and waterproof. Easy to install, using only two screws. Runs on 12V. Goes with the License Plate Bracket. Measures 2.25" x 2.2" x .72" *Additional Information in box below refers to shipping criteria
  • LED dome light with frosted lens cover. The light is flush mount to any wall. Measures 4.5" and runs on 12V. *Additional Information in box below refers to shipping criteria
  • Chrome finished decal. Four icons included in decal strip. Actions include; bicycling, kayaking, hiking and fishing. Measures 6" x 1.5". *Additional Information in box below refers to shipping criteria
  • Threaded Alum Knob 3/8"-16 x 3" Four-Arm Alum Head, with Riv-nut. Often used to hold down removable fenders
  • Replacement aluminum loop that is installed on the bottom of the tongue on a motorsports trailer. This is used to hold the end of the chain to keep them from hanging on the ground. Comes with mounting screws.
  • Ideal for movement and perimeters joints. Meets ASTM C920, S, NS, Class 50, NT, M, GA, O. Meets AAMA 802 and 805 standards. Can be used on materials such as aluminum, glass, masonry, some plastics, painted or unpainted metals. Compatible with sealed units. Indoor and outdoor use. Excellent resistance to UVs. Non-corrosive. Low VOC. Cannot be painted
  • License plate bracket is black powder coated. Includes washer and screws for installation. Light sold separately. The bracket is made of heavy-duty steel. Measures 8.5" x 3". *Additional Information in box below refers to shipping criteria
  • 2-way LED reading light with Chrome base and accents. Blue and white light options. The light is adjustable, with a swivel joint. A black button at the base to turn on and off the light and to switch from blue and white light. The light runs on 12V. *Additional Information in box below refers to shipping criteria
  • RED Brake, Turn & Running Light with a bezel. Low profile and slimline design. Like runs on 12V and is surface mounted. The light is sealed and waterproof.
  • Single Stud Fitting with round ring. Designed for tie downs for lighter items. Work with L-tracks.
  • Rectangular reflector. Adhesive backing for surface mounting. Measures 3" x 1.5". Acrylic reflector. *Additional Information in box below refers to shipping criteria
  • Black exterior antenna. Heavy duty design, meant to withstand mobile environments. 13” rubber mast, with attached 72” cable.
  • Door holdback ball and socket style. Aluminum finish. Available in Black and Mill Finish (shown). *Additional Information in box below refers to shipping criteria
  • Red LED clearance light strip. The light is dust and water proof. It's mounted with two screws at the top and bottom, and the screws are covered with two clear screw covers. The light runs on 12V. The light measures 15" x 1.25". *Additional Information in box below refers to shipping criteria
  • C-Jack from Norco - BAL Industries. Manual stabilizer jack and foot pad, rated at 4000#
  • Stainless steel hook rail bar. Hook bar measures 10" and has four hooks. Hooks will easily hold kitchen accessories, coats, towels, bathroom accessories and various bedroom accessories. Hardware include. *Additional Information in box below refers to shipping criteria
  • Chrome finished decal. Chrome and black badge style decal. Measure 4" x 4". "Small" badge *Additional Information in box below refers to shipping criteria
  • PahaQue brand exterior cover, designed to fit all Explore models, even a unit with a roof rack installed. All covers are made using heavy-duty 600D waterproof, breathable woven fabric with a 3 year warranty against defects in materials and workmanship. Zippered door allows access to your trailer without having to remove the cover each time. Installs in minutes and stays secure with adjustable straps that attach underneath trailer. Includes Cover, Straps, and Carry Bag. Ships in approximately 4 to 5 weeks. *Additional Information in box below refers to shipping criteria
  • Rear caster wheel, solid tire. Includes brackets and hardware for installation.
  • PahaQue brand exterior cover, custom fitted for the Sol Horizon. All covers are made using heavy-duty 600D waterproof, breathable woven fabric with a 3 year warranty against defects in materials and workmanship. Zippered door allows access to your trailer without having to remove the cover each time. Installs in minutes and stays secure with adjustable straps that attach underneath trailer. Includes Cover, Straps, and Carry Bag. Ships in approximately 4 to 5 weeks. *Additional Information in box below refers to shipping criteria
  • This kit will convert the Luna front LP swell latches to a hairpin hood latch style. This new latch style will add more security to the cover while towing the Luna. The kit includes 2 aluminum plates, 2 washers, and a hairpin hood latch kit. *Additional Information in box below refers to shipping criteria
  • Replacement ramp door bumper - for direct replacement of original ramp door bumper should your original bumpers get damaged or scraped. Sold by the each; with fastener hardware. *Additional Information in box below refers to shipping criteria
  • Chase & Pursue roof rack crossbar addition. Crossbar addition includes roof rack crossbar - circle tube style and four bracket clamps for install. This crossbar will only work with Chase & Pursue units with the circle tube style roof rack. *Additional Information in box below refers to shipping criteria
  • Black Scissor Jack rated for 2,500 lbs. This jack is currently used on all Sol models. This kit includes the scissor jack only. The length of the scissor jack is 24" and the retracted height is 18 3/4". *Additional Information in box below refers to shipping criteria