Banner Motorsports Industrial Flyer Luna Sol Swag
  • Exterior door holdback with strike. Aluminum finish. Available in Black or Mill Finish (shown). *Additional Information in box below refers to shipping criteria
  • Black magnetic door holdback. 3.375" long and includes stop. *Additional Information in box below refers to shipping criteria
  • Black scissor jack handle. Allows you to manually crank the jack to raise or lower them. *Additional Information in box below refers to shipping criteria
  • Black stabilizer jack rated for 800 lbs. This jack is currently used on all Flyer and Luna models. This kit includes both the stabilizer jack and a round foot pad. The length of the jack is 21" and the retracted height is 19". *Additional Information in box below refers to shipping criteria
  • RED Brake, Turn & Running Light with no bezel. Low profile and slimline design. Like runs on 12V and is surface mounted. The light is sealed and waterproof.
  • D-Ring Tiedown

    $12.50$17.50
    D-Ring Tiedown
  • Cable Clamp available in left or right hand style. Aluminum and includes hardware.
  • 16" Pull Cable w/Mount Brackets, No Striker Plate (Slide Out Step). Used on inTech Motorsports Trailers and on Industrial Trailers.
  • Lug Nut

    $2.60
    Stainless steel lug nut. Used on all inTech RV tires - Flyer, Luna and Sol models. .5" *Additional Information in box below refers to shipping criteria
  • Amber Side Marker Light LED with bezel, turn signal light on side of the unit. Light runs on 12V. Sealed and waterproof. Surface mount.
  • Stainless steel roll up sink cover. Cover best fits the sink used in the Sol units. When cover is not being used, it is easy to store in drawer located in the Sol kitchen. Cover measures 25.5" x 14.75" *Additional Information in box below refers to shipping criteria  
  • Compartment/ gen Door Latch commonly used on motorsports trailers and fiber optic trailers. Door lock can be used on generator doors and locking baggage doors. Door lock comes with lock, striker plate and key. Please note - Keys are AE***; key provided will work your new lock but we cannot guarantee this lock key assembly will match any other similar locks on your trailer.
  • Zip universal replacement breakaway cable 4'. Quick & easy hook up for the breakaway cable - no more dragging on the ground. *Additional Information in box below refers to shipping criteria
  • Aluminum black anodized mounting button, used for the exterior Flyer removable kitchen table.   Price includes two mounting buttons and hardware. *Additional Information in box below refers to shipping criteria
  • LED License plate light. Light runs on 12V, polished chrome finish. Includes mounting gasket.
  • Stainless steel wheel center cap. Used on all inTech RV wheels - Flyer, Luna and Sol models. *Additional Information in box below refers to shipping criteria
  • Interior LED light; 18.25" x 4.731", regularly used as ceiling light
  • Angled LED Porch Light

    $18.75$25.00
    LED light with black housing. The light is sealed and waterproof. Runs on 12V and comes with hard wires, lead and ground wires. Measures 11" long.  *Additional Information in box below refers to shipping criteria 
  • Black Rubber Hinge Cover often used on ramp doors. Used to replace worn out covers, OEM material used to keep the hinge clean and sealed.
  • The black gussets are used to help add extra stabilization to the square tube roof rack on the Flyers. This kit includes four corner gussets and screws for installation.  *Please note - ordering QTY 1 = four gussets + screws* *Additional Information in box below refers to shipping criteria
  • Mini LED Clearance Light. The light is sealed and waterproof. The light runs on 12V. It is surface mount. Includes a bezel.
  • Custom made at inTech for each trailer. We pre-bend these at full size and ship with mounting hardware. After installation, you will need to cut the ends of the fender off as they will be shipped at full length (longer than needed). Available in Mill Finish or Clear Anodized and Black Anodized.
  • Double Stud Fitting with O ring. Designed for tie down on vehicles or other heavy/bulky items. Works with L Tracks.
  • Powered Roof Vent and Fan with white lid and base. The vent runs on 12V. Includes a screen, and weather stripping.
  • Dual 20# LP Tank Kit includes regulator, tank pan, LP hoses and rods. This kit will convert a one LP tank set up into a two LP tank set up. This kit will only work on Sol units. *Additional Information in box below refers to shipping criteria
  • 2" grey wall towel/coat hook. Included hardware for easy install. *Additional Information in box below refers to shipping criteria
  • Exclusive for the Sol Dawn, this extra extension will dramatically increase the sleeping area. Dimensions 35" x 15". Finished bed measures 63"x80". *Additional Information in box below refers to shipping criteria
  • Cabinet Door Latch Cabinet Latch. Locking 1.75" Arm. Includes .375" mounting bracket. Available in Chrome or Black (shown). *Additional Information in box below refers to shipping criteria
  • PahaQue brand Luna cover, designed to fit all Luna models, even the models with a roof rack installed. All covers are made using heavy-duty 600D waterproof, breathable woven fabric with a 3 year warranty against defects in materials and workmanship. Zippered door allows access to your trailer without having to remove the cover each time. Installs in minutes and stays secure with adjustable straps that attach underneath trailer. Includes Cover, Straps, and Carry Bag. Ships in approximately 4 to 5 weeks.
  • Roof rack clamp brackets. *Additional Information in box below refers to shipping criteria
  • Axle Lift Kit

    $125.00$150.00
    The lift kit includes installation instructions, spaces and mounting hardware. The lift kit is meant to be used for a single axle only. This kit will provide a 2.625” lift on the axle. *Additional Information in box below refers to shipping criteria
  • Diamond Framed Net

    $16.25$18.75
    Creates functional storage space by using netting and a steel framing. Mounts flush to any open wall space. Includes mounting hardware for installation. *Additional Information in box below refers to shipping criteria
  • The tent comfortably sleeps four people with extra storage space. The tent is complete with two entrances and three mesh windows. It attaches to the rear of the unit to accommodate extra sleeping space or allow for more leisure space. Size of the complete tent; 8.5’ x 8.5’ x 6.5’. Works with Flyer Chase and Pursue models. *Additional Information in box below refers to shipping criteria
  • DOT Tape, 2" wide, alternating red and white every 6 inches. Sold by the running foot.
  • LED oval clearance light. The light runs on 12V. The light is sealed and waterproof. The light includes a snap on chrome bezel.
  • Gray bungee cord with fastener ends, installed on open cabinet storage areas. 5 sizes available. Please measure the storage area width and note quantity needed to ensure correct ordering. Quantity of one (1) bungee cord. *Please note - for easy install, a right angled drilled is HIGHLY recommended.* *Additional Information in box below refers to shipping criteria