Banner Motorsports Industrial Flyer Luna Sol Swag
  • LED Light for stop and turn. The light is sonically sealed and is waterproof. Runs on 12V. A grommet (SKU M-8414) is often purchased with this tailight. *Additional Information in box below refers to shipping criteria
  • FMVSS quality entry door latch with key and deadbolt. TriMark. Comes with lock, keys, striker plate, and screws to assemble and install.
  • Black "ROVER" name decal. Commonly used in the Luna models, on the interior valance. Decal is a matte color and with raised letters. Each letter measures 4" x 1.75", complete decal measures 22" x 1.75". *Additional Information in box below refers to shipping criteria
  • CFF-35 portable cooler. 34.3 L of storage. Single compartment allows either refrigeration or freezing. Operates off of 12V or 120V. This cooler fits perfectly in the Sol Horizon pull out exterior kitchen. *Additional Information in box below refers to shipping criteria
  • 12v ON-OFF switches, Black with Plate & Cover – 4 Gang
  • 12v ON-OFF switches, Black with Plate & Cover - 1 Gang
  • Package includes two curved bench cushions that fit the front bench seats in the Luna and two window black out shade and valance assemblies. *Additional Information in box below refers to shipping criteria
  • iT Logo Decal, 14.5" x 14.75" Orange and Black. Flat standard-style decal.
  • Roof mounted strobe light, often included on inTech fiber - commercial trailers
  • Silver hanging wall clock. Light weight for easy hanging. Battery not included. Measures 3.5" *Additional Information in box below refers to shipping criteria
  • 72" White LED light rope with 3M tape backing. Rope is 12V powered. *Additional Information in box below refers to shipping criteria
  • Interior fabric window curtains. Includes two side window panels and two entry door window panels. Side window panels measure 58" x 28" and the entry door window panels measure 28" x 24.5".
  • Light switch with slide dimmer for 12V lights. One switch for on/off and a slide switch for dimming.
  • Chrome finished decal. Moon with the "Luna" logo. *Additional Information in box below refers to shipping criteria
  • Silver plastic LP cover for the Luna. This heavy-duty plastic cover is custom made and made to fit perfectly over the LP tank on the front of all Luna models. Part includes cover only. *Additional Information in box below refers to shipping criteria
  • Charcoal hanging storage basket with Luna logo in the center. Measures 16" x 8.25" x 4". *Additional Information in box below refers to shipping criteria
  • Ideal for movement and perimeters joints. Meets ASTM C920, S, NS, Class 50, NT, M, GA, O. Meets AAMA 802 and 805 standards. Can be used on materials such as aluminum, glass, masonry, some plastics, painted or unpainted metals. Compatible with sealed units. Indoor and outdoor use. Excellent resistance to UVs. Non-corrosive. Low VOC. Cannot be painted
  • Charcoal colored carpet 120" wide, approximately 1/8" thick. Sold in 5 foot length increments. Quantity 1=5 rolling feet. Quantities of more than 1 will be sent in 1 continuous roll, up to 50'. Trim sold separately, part# 2479(Aluminum finish) and #5603(Black Anodized aluminum finish)
  • Charcoal colored padded carpet 36" height, approximately 3/16" thick. Sold in 10 foot length increments. Quantity 1=10 feet. Quantities of more than 1 will be sent in 1 continuous roll, up to 300'. Trim sold separately, part# 5326(Aluminum finish) and #6226(Black Anodized aluminum finish)
  • Angled LED light. The light is sealed and waterproof. Runs on 12V and comes with hard wires, lead and ground wires. Available in Black or Chrome(Shown) and in 8" or 13.7"(Shown) lengths. *Additional Information in box below refers to shipping criteria
  • LED clear back up light. 3 prong oval wire connector on back. Light runs on 12V and is sealed for a waterproof design. The light includes a chrome bezel.
  • Travel Trailer latch with lock and deadbolt. Uses Global Link keys. Key codes vary and we cannot guarantee that quantities over 1 will have the same key code. New installs will need striker plate.
  • 15" Slimline LED backup light. Low profile and slimline design. Runs on 12v. Attaches with 1 screw at each end. Bezel sold separately, part# 100. Can be used with or without bezel.
  • Top handle, manual crank jack, capable of a 5000 pound load. Foot pad sold separately.
  • Fishing Rod Holder

    $24.99$70.99
    The perfect accessory to store your fishing rods. Please allow 2-3 weeks production time.
  • Plastic soft touch white door grab handle. Handle is a curved design and is long enough for one or two hand grip. Handle has 11" of black rubber in the center for a non-slip grip. Handle measures 18" long with four screw opening at top and bottom. *Additional Information in box below refers to shipping criteria
  • Manual night roll shade for the windshield. Shade measures 68.5" x 40". This night shade will block the sun and provide heat/UV protection.The shade will provide complete privacy during the day or night. This shade fits all Luna models. *Additional Information in box below refers to shipping criteria
  • Creates functional storage space by using netting and steel framing. Mount flush to any open wall space. Includes mounting hardware for installation. This specific size is used in the Luna kitchen storage opening, net measures 7" x 25". *Additional Information in box below refers to shipping criteria
  • Coleman 40 QT portable cooler. This cooler keeps items cold with no need for ice and keeps items up to 40 degrees cooler than the surrounding temperature. Operates off of 12V. This cooler fits perfectly in all Luna models. *Additional Information in box below refers to shipping criteria
  • TC-35 portable cooler. 33L of storage. This cooler has the capabilities to keep items chilled 38 - 80 below ambient temp. or able to keep items warmed up to 149 degrees. Operates off of 12V. This cooler fits perfectly in the Flyer models with the pull out kitchen. *Additional Information in box below refers to shipping criteria
  • Tongue Box

    $120.00
    Black poly trailer tongue box with a stainless steel latch. Made with high density polyethylene. The tongue box measures 18" x 19" x 36" (backside), 18" (frontside). ** Please note, if your RV did not come with a tongue box installed, this will not fit your unit - direct replacement only ** *Additional Information in box below refers to shipping criteria
  • Tent canvas will fit Explore tip-out bed door 81" x 46.75". Includes canvas only, no additional hardware. Please allow for at least a two week lead time. *Additional Information in box below refers to shipping criteria
  • Striker Plates (Pair) with screws for inTech Motorsport Trailer with a ramp door that uses paddle latches. These Stiker Plates are for the door and receive the paddle to latch the door closed. Sold by the pair. *Additional Information in box below refers to shipping criteria
  • White toilet paper holder, completely closes and will keep the toilet paper roll dry at all times. Holder fits one toilet paper roll. *Additional Information in box below refers to shipping criteria